36 Ton Used Crawler Hydraulic Excavator with CLSS Load Sensing and 1.6 m3 Bucket Capacity

A second hand Komatsu PC360-8 crawler hydraulic excavator from a Japanese limestone quarry, reading 7,200 hours on a 2017 machine. The SAA6D114E engine and the CLSS load sensing hydraulic system are original, and the machine was maintained on a Komatsu dealer programme for its whole working life, with service printouts to confirm the intervals. Thirty six tons of operating weight makes it a true production loading tool rather than a general purpose digger.

• CLSS Load Sensing: Pump output follows demand, so the machine keeps full breakout force at reduced engine speed and burns noticeably less fuel on light passes than fixed displacement competitors.
• Production Bucket: A 1.6 cubic metre bucket matched to thirty ton trucks gives four to five pass loading and shortens the queue time that kills haul fleet productivity.
• Documented Dealer Service: Komatsu dealer service printouts, filter receipts and hour meter readings are all consistent, giving the buyer a verifiable maintenance trail rather than a verbal claim.
• Straight Structure: The boom, stick and carbody were magnaflux checked with no cracks or repair welding, and pins and bushings remain tight through the attachment.
• Heavy Undercarriage: Track group measured on both sides with even wear across chains, rollers, idlers and sprockets, and more than half of expected service life remaining.
• Operator Comfort: Factory air conditioned cab with air suspension seat, clean monitor and low noise levels for long shifts in hot and dusty conditions.

Quarry loading, mining overburden removal, large foundation excavation, canal and dam works and heavy road earthworks all suit this machine. Contractors in Africa, the Middle East and Southeast Asia select the 360 frame when they need output at the face without the transport cost of a fifty ton machine. Because the machine tolerates dust and heat with only routine filter attention, it holds up well on sites where maintenance standards are demanding but conditions are harsh.

Inspection covered engine blow by, main relief pressure at both pumps, cylinder drift, swing bearing backlash, track gauge and shoe wear, documented on a signed sheet with dated photographs. Hydraulic oil was sampled and checked for water ingress and metal content. The machine cold starts cleanly, holds working temperature under sustained load, and reports no active fault codes.

Every PC360-8 completes a 42 point pre-shipment inspection covering engine blow by, hydraulic main relief pressure at both pumps, cylinder drift, swing bearing backlash, track gauge and shoe wear, plus full electrical function. Findings are issued as a signed inspection sheet with date stamped photographs. Each machine leaves our yard with a 12 month powertrain warranty on engine and hydraulic pump, and we hold fast moving filters, seals and undercarriage parts for express dispatch to your nearest port.

Export paperwork is prepared in house and includes commercial invoice, packing list, bill of lading, certificate of origin and, where required, CE or EPA conformity documents. Our technical team answers in English, Spanish, Russian and Arabic and can join a video call from your workshop while a technician stands beside the machine. Spare parts quotations always show both OEM and aftermarket options so you can balance cost against lead time for your operating conditions.